Shearloclogo2.jpg (25110 bytes) Shear-loc Thumb screw knobs hand 

See  reference guide for complementary lines (Ref. Guide)
                 
Home ] Knobs Only ] Thumb Screws ] Key Drive ] Thumb Nuts ] Kits ] FAQ ] What's New/ Etc. ]
We will be on Summer Shutdown July 1 returning July 11

Shear-loc Thumb screw knobs
1/4" Key Drive


Dual Adjusting Type
Click on the desired thread pitch to go to that part of the page.

Or scroll down to see the whole page.

1/4-20         1/4-28
UNC-3A                                      UNF-3A

 

 

1/4-20 SERIES


(All of the screws in the tables below have 3A threads and are fully threaded except part numbers marked with a " * "at the end )
(Screws longer than listed are available but are normally not  fully threaded.)

(When using the hex socket to install this thumbscrew, caution should be taken not to over tighten the plastic knob if it comes in contact with a surface, as knob damage or breakage can occur)

The plastic knob portion of the thumbscrew is currently offered in black and will soon be available in red, gray and yellow. As with the entire line, Shear-Loc will furnish free samples for testing needs.


Knurled Style Key Drive Thumbscrew

Please add Knob color and Screw type prefix to the part number.

B=Black, R=Red, G=Gray, Y=Yellow, A=Alloy, S=Stainless, Z=Zinc plate

For example: A 3/4 diameter Black Knurled knob  with a "L" dimension of 3/8 Alloy screw would have a part number of K03B-2520-0.37A

Note: Items at the right of the table marked with "X" are standard items "O" are non standard items. Please inquire about the availability of non standards.

Please go to the what's new/etc page. for information on zinc plated screw assemblies marked with a  "O" .

Screw/L Dim.

A Dim./Style

Part Number

B

R

G

Y

A S Z

1/4-20x3/8"

3/4" Knurled

K03wpe23.jpg (705 bytes)-2520-0.37wpe1E.jpg (705 bytes)

x

o o o x x o
1/4-20x3/8" 1" Knurled K04wpe23.jpg (705 bytes)-2520-0.37wpe1E.jpg (705 bytes) x o o o x x o

1/4-20x1/2"

3/4" Knurled

K03wpe23.jpg (705 bytes)-2520-0.50wpe1E.jpg (705 bytes)

x

o o o x x o
1/4-20x1/2" 1" Knurled K04wpe23.jpg (705 bytes)-2520-0.50wpe1E.jpg (705 bytes) x o o o x x o

1/4-20x5/8"

3/4" Knurled

K03wpe23.jpg (705 bytes)-2520-0.62wpe1E.jpg (705 bytes)

x

o o o x x o
1/4-20x5/8" 1" Knurled K04wpe23.jpg (705 bytes)-2520-0.62wpe1E.jpg (705 bytes) x o o o x x o

1/4-20x3/4"

3/4" Knurled

K03wpe23.jpg (705 bytes)-2520-0.75wpe1E.jpg (705 bytes)

x

o o o x x o
1/4-20x3/4" 1" Knurled K04wpe23.jpg (705 bytes)-2520-0.75wpe1E.jpg (705 bytes) x o o o x x o

1/4-20x7/8"

3/4" Knurled

K03wpe23.jpg (705 bytes)-2520-0.87wpe1E.jpg (705 bytes)

x

o o o x x o
1/4-20x7/8" 1" Knurled K04wpe23.jpg (705 bytes)-2520-0.87wpe1E.jpg (705 bytes) x o o o x x o

1/4-20x1 1/8"

3/4" Knurled

K03wpe23.jpg (705 bytes)-2520-1.12wpe1E.jpg (705 bytes)

x

o o o x x o
1/4-20x1 1/8" 1" Knurled K04wpe23.jpg (705 bytes)-2520-1.12wpe1E.jpg (705 bytes) x o o o x x o

1/4-20x1 3/8"

3/4" Knurled

K03wpe23.jpg (705 bytes)-2520-1.37wpe1E.jpg (705 bytes)*

x

o o o x x o
1/4-20x1 3/8" 1" Knurled K04wpe23.jpg (705 bytes)-2520-1.37wpe1E.jpg (705 bytes)* x o o o x x o

Keys Available at Competitive Prices

We also offer many other standard & semi standard screw lengths fully and not fully threaded.
  Please call for more information

1-800-775-5668

Click here to go back to the Key Drive selection page.

Don't forget about our original thumbscrewsknobs only and convenient knob kits
For purchasing information go to FAQ

 

1/4-28 SERIES


(All of the screws in the tables below have 3A threads and are fully threaded except part numbers marked with a " * "at the end )
(Screws longer than listed are available but are normally not  fully threaded.)

(When using the hex socket to install this thumbscrew, caution should be taken not to over tighten the plastic knob if it comes in contact with a surface, as knob damage or breakage can occur)

The plastic knob portion of the thumbscrew is currently offered in black and will soon be available in red, gray and yellow. As with the entire line, Shear-Loc will furnish free samples for testing needs.


Knurled Style Key Drive Thumbscrew

 

Please add Knob color and Screw type prefix to the part number.

B=Black, R=Red, G=Gray, Y=Yellow, A=Alloy, S=Stainless, Z=Zinc plate

For example: A 3/4" diameter Black Knurled knob  with a "L" dimension of 3/8" Alloy screw would have a part number of K03B-2528-0.37A

Note: Items at the right of the table marked with "X" are standard items "O" are non standard items. Please inquire about the availability of non standards.

Please go to the what's new/etc page. for information on zinc plated screw assemblies marked with a  "O" .

Screw/L Dim.

A Dim./Style

Part Number

B

R

G

Y

A S Z

1/4-28x3/8"

3/4" Knurled

K03wpe23.jpg (705 bytes)-2528-0.37wpe1E.jpg (705 bytes)

x

o o o x x o
1/4-28x3/8" 1" Knurled K04wpe23.jpg (705 bytes)-2528-0.37wpe1E.jpg (705 bytes) x o o o x x o

1/4-28x1/2"

3/4" Knurled

K03wpe23.jpg (705 bytes)-2528-0.50wpe1E.jpg (705 bytes)

x

o o o x x o
1/4-28x1/2" 1" Knurled K04wpe23.jpg (705 bytes)-2528-0.50wpe1E.jpg (705 bytes) x o o o x x o

1/4-28x5/8"

3/4" Knurled

K03wpe23.jpg (705 bytes)-2528-0.62wpe1E.jpg (705 bytes)

x

o o o x x o
1/4-28x5/8" 1" Knurled K04wpe23.jpg (705 bytes)-2528-0.62wpe1E.jpg (705 bytes) x o o o x x o

1/4-28x3/4"

3/4" Knurled

K03wpe23.jpg (705 bytes)-2528-0.75wpe1E.jpg (705 bytes)

x

o o o x x o
1/4-28x3/4" 1" Knurled K04wpe23.jpg (705 bytes)-2528-0.75wpe1E.jpg (705 bytes) x o o o x x o

1/4-28x7/8"

3/4" Knurled

K03wpe23.jpg (705 bytes)-2528-0.87wpe1E.jpg (705 bytes)

x

o o o x x o
1/4-28x7/8" 1" Knurled K04wpe23.jpg (705 bytes)-2528-0.87wpe1E.jpg (705 bytes) x o o o x x o

1/4-28x1 1/8"

3/4" Knurled

K03wpe23.jpg (705 bytes)-2528-1.12wpe1E.jpg (705 bytes)

x

o o o x x o
1/4-28x1 1/8" 1" Knurled K04wpe23.jpg (705 bytes)-2528-1.12wpe1E.jpg (705 bytes) x o o o x x o

1/4-28x1 3/8"

3/4" Knurled

K03wpe23.jpg (705 bytes)-2528-1.37wpe1E.jpg (705 bytes)*

x

o o o x x o
1/4-28x1 3/8" 1" Knurled K04wpe23.jpg (705 bytes)-2528-1.37wpe1E.jpg (705 bytes)* x o o o x x o

Keys Available at Competitive Prices

We also offer many other standard & semi standard screw lengths fully and not fully threaded.
  Please call for more information

1-800-775-5668

Click here to go back to the Key Drive selection page.

Don't forget about our original thumbscrewsknobs only and convenient knob kits
For purchasing information go to FAQ

 

Knobs Manufactured in the U.S.A. by:

Shear-Loc Products under USA patent no. 5,017,068
and E.U. patent 0551295

Contact Information

  Telephone:

1-800-775-5668   Office hours  8:00AM - 5:00PM  PST
1-949-768-8985

  FAX:

1-949-768-8705 24Hrs. 7Days

  Postal address:

23191 Peralta Dr.
Laguna Hills Ca. 92653-1499

  Electronic mail:

Sales: Sales@shear-loc.com
Customer Support: Support@shear-loc.com
Webmaster: Markfk@shear-loc.com

    Last Modified:May 23, 2016